пока вот что у амеров нашел
I found this after looking for weeks on the related sites. I have tried it on my bike but think i may be doing something wrong in between step 4 and 5. maybe you guys are able to make it happen and share with us.
Switching over the water temperature display
1. Turn on the main switch with the “RESET” and “SELECT” buttons held down.
“Co” appears in the left of the display area for the distance and time.
2. Press the “SELECT” button. The display changes to “dIAG “.
3. Press both the “RESET” and “SELECT” buttons at the same time.
“d01: xx” appears in the display area. (A certain number is displayed in “xx”.)
4. Pressing the “RESET” button 2 times displays “d62: xx”.
The “xx” in “d62: xx” indicates which thermometric scale to display, Celsius or
Fahrenheit.
“00” = No display
“01” = Celsius (°C)
“02” = Fahrenheit (°F)
To change the display, operate the engine switch “OFF” → “ON”. The thermometric
indication changes in order of “00”, “01”, “02”, and back to “00” and so on.
5. When the desired scale appears, turn off the main switch.
- проверить не могу тк мозги еще не пришли
Сообщение отредактировал xSmit: 19 февраля 2016 - 17:43